IRIS 5# hinv -mv
Location: /hw/module/1/slot/MotherBoard/node
PIMM_2XT5_1MB Board: barcode FXJ789 part 013-1896-001 rev G
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
IP29 Board: barcode DFP135 part 030-1244-001 rev H
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
2 180 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
CPU 0 at Module 1/Slot 1/Slice A: 180 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 2.6. Scache: Size 1 MB Speed 180 Mhz Tap 0x8
CPU 1 at Module 1/Slot 1/Slice B: 180 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 2.6. Scache: Size 1 MB Speed 180 Mhz Tap 0x8
Main memory size: 512 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Memory at Module 1/Slot 1: 512 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Origin 200 base I/O, module 1 slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 3 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.136
|
