o2 1# hinv -mv
CPU: MIPS R5000 Processor Chip Revision: 2.1
FPU: MIPS R5000 Floating Point Coprocessor Revision: 1.0
1 200 MHZ IP32 Processor
Main memory size: 256 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.16
Integral SCSI controller 0: Version ADAPTEC 7880
Disk drive: unit 1 on SCSI controller 0 (unit 1)
CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
PCI Adapter ID (vendor 36868, device 32888) pci slot 1
PCI Adapter ID (vendor 36868, device 32888) pci slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE
o2 2# /usr/gfx/gfxinfo
Graphics board 0 is "CRM" graphics.
Managed (":0.0") 1280x1024
32 + 32 bitplanes
board revision 2, CRM revision C, GBE revision B
Monitor 0 type: Unknown
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 75.03Hz (1280x1024_75)
|
